ZT Standard Rear
Rear attachment only

The ZT Standard rear attachment is an essential piece of your work at height safety equipment that can be worn as a fall restraint or fall safety harness. There are no groin straps, so it's very comfortable to wear and importantly avoids the damage that groin straps can cause in the event of a fall. It has no loose straps or lanyards, so there is no risk of catching these on door handles or wing mirrors whilst entering or exiting a vehicle. Restraint or shock absorbing lanyards can be connected easily to the harnesses dorsal/rear point attachment. Between work at height tasks and during breaks the lanyard can be removed and stowed, without the need to need to remove the harness or change. The design of the ZT Standard Rear harness eliminates the use of groin straps and instead uses a system that works with the body to distribute and absorb the forces experienced in the event of a fall. The harness combines an integrated harness and lanyard with performance work-wear trousers or overalls. It employs a patented leg gaiter system with lanyard and rear point attachment. Certified to 150Kg (approx 23.5 stone) bodyweight Certified to EN361 & AS/NZS 2002 SIZE GUIDE Available in WAIST SIZES 30" - 48" LEG LENGTH Regular (Bespoke sizes available on request) Want to speak to somebody about how the ZT Standard Rear Harness could work for you?
  • ZT Lanyard webbing

    The orange webbing takes the force of the fall and activates the gaiter system to distribute the force more evenly around the body. Inspection of the orange webbing should form part of the daily inspection

  • ZT Harness webbing

    The black harness webbing makes up the structural parts of the upper torso section of the full body harness.

  • ZT Gaitor structure

    The unique gaiter system firmly grabs the calf in the event of a fall and spreads the force of a fall. Following a fall, the gaiter holds the wearer comfortably and does not constrict the groin area and main arteries.

  • ZT Safety Clip

    The Safety clip ensures the ZT harness can be fitted easily. It is a comfortable design that does not aggravate the wearer.

  • Step 1

    1. The ZT Safety Harness is shown as fitted and worn for work, with front point attachment and carabiner shown here in stowed position. Download this guide as a PDF here

  • Step 2

    2. Here the trouser unit has been removed to expose the leg lanyard and calf gaiter. In the event of a fall the front point attachment pulls and clenches the calf gaiter.

  • Step 3

    The exposed calf gaitor shown here

  • Step 4

    4. In the event of a fall the calf gaiter clenches, pulling on the fronts of the legs, the fall forces are distributed evenly on the body pulling it into a seated position. The bodys resistance to this action help to absorb some of the fall forces, further reducing risk of trauma.

  • Step 1

    1. Ensure front section of harness hangs to trouser front and rear harness section hangs to rear. Download this guide as a PDF here

  • Step 2

    2. Step into trousers as normal, ensure feet go through leg gaiter
    (Leg gaiter shown here)

  • Step 3

    3. Connect belt buckle and adjust for comfort

  • Step 4

    4. Reach for rear section of harness webbing and ZT Clip

  • Step 5

    5. Ensure webbing is not twisted

  • Step 6

    6. Pass over your head

  • Step 7

    7. Sits on Shoulders

  • Step 8

    8. Connects front and rear sections of harness.

  • Step 9

    9. Depress safety locking clip

  • Step 10

    10. Lower section of clip hooks into upper section.

  • Step 11

    11. Adjust shoulder straps for comfort.

  • Step 12

    12. Straps should sit firmly on shoulders without digging in.

  • Step 13

    13. Velcro is used to attach lanyard terminal to main webbing.

  • Step 14

    14. How fitted harness should appear

  • Step 1

    1. ZT wash bag with trouser belt loop attachment and toggle fastener. Download this guide as a PDF here

  • Step 2

    All metal elements are placed in the washbag during washing

  • step 3

    Grip elements together and insert into washbag

  • Step 4

    Fasten to toggle to ensure elements stay secure

  • Step 5

    Elements secured and ready to attach wash bag loop to belt

  • Step 6

    Wash bag loop is attached to the trouser belt and placed inside the leg for washing.