ZT Standard Fit Hi Viz Harness

The ZT Hi Vis Trouser unit conforms to EN471: 2003 + A1: 2007 Class 1 Level 2
Designed and manufactured to meet the tough demands of todays worker.
These trousers are hardwearing, with additional features:
Two High Visibility strips on each leg,
Side Pockets,
Cargo Pocket,
Side Elastication.

MATERIAL
80% Polyester, 20% Cotton, 275gsm,

SIZE GUIDE
Available in WAIST SIZES 30" - 48" *
*For comfort ZT recommend you choose 1 size up from normal waist sizes e.g. 34" waist order 36" waist

LEG LENGTH 30" MED or 32" LONG

(Bespoke sizes available on request)

Certified to EN361:2002

Want to speak to somebody about how the ZT Standard Fit Hi Viz Harness could work for you?

From £180.00

Order Now

Please select the quantities that you'd like by waist size and leg length.

Need another size?
Size Long Regular
30 Inch waist
32 Inch waist
34 Inch waist
36 Inch waist
38 Inch waist
40 Inch waist
42 Inch waist
44 Inch waist
46 Inch waist
48 Inch waist

Order by phone 0844 573 4899

  • ZT Safety Clip

    The ZT Safety Clip makes it easy to clip in and clip out, features dual action release function, for 100% reliability and performance.

  • ZT Calf Gaiter

    Only in the event of a fall, the ZT Calf Gaiter clenches the lower leg, distributing arrest fall forces and supporting body in seated position.

  • ZT Wash Bag

    Harness can be washed as required, safety clip stored in bag during washing process.

  • ZT Inspection and Trouser Replacement

    Inspection facility provided, including optional replacement for worn trouser unit.

  • ZT Lanyard webbing

    The orange webbing takes the force of the fall and activates the gaiter system to distribute the force more evenly around the body. Inspection of the orange webbing should form part of the daily inspection.

  • ZT Harness webbing

    The black harness webbing makes up the structural parts of the upper torso section of the full body harness

  • ZT Gaiter structure

    The unique gaiter system firmly grabs the calf in the event of a fall and spreads the force of a fall. Following a fall, the gaiter holds the wearer comfortably and does not constrict the groin area and main arteries.

  • ZT Safety Clip

    The Safety clip ensures the ZT harness can be fitted easily. Made from Domex 700, the clip provides a weather resistant extra high strength steel. In addition to this it is a comfortable design that does not aggravate the wearer.

  • Step 1

    1. The ZT Safety Harness is shown as fitted and worn for work, with front point attachment and carabiner shown here in stowed position. Download this guide as a PDF here

  • Step 2

    2. Here the trouser unit has been removed to expose the leg lanyard and calf gaiter. In the event of a fall the front point attachment pulls and clenches the calf gaiter

  • Step 3

    3. The exposed calf gaiter shown here.

  • Step 4

    4. In the event of a fall the calf gaiter clenches, pulling on the fronts of the legs, the fall forces are distributed evenly on the body pulling it into a seated position. The bodys resistance to this action help to absorb some of the fall forces, further reducing risk of trauma.

  • Step 1

    1. Ensure front section of harness hangs to trouser front and rear harness section hangs to rear. Download this guide as a PDF here

  • Step 2

    2. Step into trousers as normal, ensure feet go through leg gaiter
    (Leg gaiter shown here)

  • Step 3

    3. Connect belt buckle and adjust for comfort

  • Step 4

    4. Reach for rear section of harness webbing and ZT Clip

  • Step 5

    5. Ensure webbing is not twisted

  • Step 6

    6. Pass over your head

  • Step 7

    7. Sits on shoulders

  • Step 8

    8. Connect front and rear sections of harness

  • Step 9

    9. Depress safety locking clip

  • Step 10

    10. Lower section of clip hooks into upper section

  • Step 11

    11. Adjust shoulder straps for comfort

  • Step 12

    12. Straps should sit firmly on shoulders without digging in

  • Step 13

    13. Velcro is used to attach lanyard terminal to main webbing when not in use

  • Step 14

    14. How finished fitted harness should appear

  • Step 1

    1. ZT wash bag with trouser belt loop attachment and toggle fastener. Download this guide as a PDF here

  • Step 2

    2. All metal elements of harness are placed in wash bag to protect harness during washing

  • Step 3

    3. Grip elements together and insert into wash bag.

  • Step 4

    4. Fasten to toggle to ensure elements stay secure.

  • Step 5

    5. Elements secured and ready to attach wash bag loop to harness trouser belt.

  • Step 6

    6. Wash bag loop is attached to trouser belt, and placed inside trousers ready for washing

^ Back to top