ZT Standard Fit Harness
The ZT Safety Harness is an essential piece of your work at height safety equipment that can be worn as a fall restraint or fall safety harness. There are no groin straps, so it's very comfortable to wear and importantly avoids the damage that groin straps can cause in the event of a fall.
It has no loose straps or lanyards, so there is no risk of catching these on door handles or wing mirrors whilst entering or exiting a vehicle. There is no 'D' ring so it's also comfortable to wear whilst driving. Restraint or shock absorbing lanyards can be connected easily to the harnesses front point attachment. Between work at height tasks and during breaks the lanyard can be removed and stowed, without the need to need to remove the harness or change.
The design of the ZT Safety harness eliminates the use of groin straps and instead uses a system that works with the body to distribute and absorb the forces experienced in the event of a fall. The harness combines an integrated harness and lanyard with performance work-wear trousers or overalls. It employs a patented leg gaiter system with lanyard and front point attachment.
(EC Certificate No.5141, PPE Directive 89/686/EEC annex II using EN 361:2002)
SIZE GUIDE
Available in WAIST SIZES 30" - 48"
( For comfort ZT recommend you choose 1 size up from normal waist sizes e.g. 34" waist order 36" waist)
LEG LENGTH 30" MED or 32" LONG
(Bespoke sizes available on request)
Want to speak to somebody about how the ZT Standard Fit Harness could work for you?
From £180.00
Order Now
Please select the quantities that you'd like by waist size and leg length.
Need another size?Order by phone 0844 573 4899
-
ZT Safety Clip
The ZT Safety Clip makes it easy to clip in and clip out, features dual action release function, for 100% reliability and performance.
-
ZT Calf Gaiter
Only in the event of a fall, the ZT Calf Gaiter clenches the lower leg, distributing arrest fall forces and supporting body in seated position.
-
ZT Wash Bag
Harness can be washed as required, safety clip stored in bag during washing process.
-
Dickies Workwear
Supplied by Dickies, the work trousers are of the best quality. We can supply the harness into almost their full range of garments and offer a replacement trouser service if they wear out. Check out the Pro-Fit Harness for an even harder wearing trouser. Made from Kevlar and Cordura it comes with hammer loop and removable pockets ideal for all types of construction worker!
-
ZT Lanyard webbing
The orange webbing takes the force of the fall and activates the gaiter system to distribute the force more evenly around the body. Inspection of the orange webbing should form part of the daily inspection.
-
ZT Harness webbing
The black harness webbing makes up the structural parts of the upper torso section of the full body harness.
-
ZT Gaiter structure
The unique gaiter system firmly grabs the calf in the event of a fall and spreads the force of a fall. Following a fall, the gaiter holds the wearer comfortably and does not constrict the groin area and main arteries.
-
ZT Safety Clip
The Safety clip ensures the ZT harness can be fitted easily. Made from Domex 700, the clip provides a weather resistant extra high strength steel. In addition to this it is a comfortable design that does not aggravate the wearer.
-
Step 1
1. The ZT Safety Harness is shown as fitted and worn for work, with front point attachment and carabiner shown here in stowed position. Download this guide as a PDF here
-
Step 2
2. Here the trouser unit has been removed to expose the leg lanyard and calf gaiter. In the event of a fall the front point attachment pulls and clenches the calf gaiter.
-
Step 3
3. The exposed calf gaiter shown here.
-
Step 4
4. In the event of a fall the calf gaiter clenches, pulling on the fronts of the legs, the fall forces are distributed evenly on the body pulling it into a seated position. The bodys resistance to this action help to absorb some of the fall forces, further reducing risk of trauma.
-
Step 1
1. Ensure front section of harness hangs to trouser front and rear harness section hangs to rear. Download this guide as a PDF here
-
Step 2
2. Step into trousers as normal, ensure feet go through leg gaiter
(Leg gaiter shown here) -
Step 3
3. Connect belt buckle and adjust for comfort
-
Step 4
4. Reach for rear section of harness webbing and ZT Clip
-
Step 5
5. Ensure webbing is not twisted
-
Step 6
6. Pass over your head
-
Step 7
7. Sits on shoulders
-
Step 8
8. Connect front and rear sections of harness
-
Step 9
9. Depress safety locking clip
-
Step 10
10. Lower section of clip hooks into upper section
-
Step 11
11. Adjust shoulder straps for comfort
-
Step 12
12. Straps should sit firmly on shoulders without digging in
-
Step 13
13. Velcro is used to attach lanyard terminal to main webbing when not in use
-
Step 14
14. How finished fitted harness should appear
-
Step 1
1. ZT wash bag with trouser belt loop attachment and toggle fastener. Download this guide as a PDF here
-
Step 2
2. All metal elements of harness are placed in wash bag to protect harness during washing.
-
Step 3
3. Grip elements together and insert into wash bag.
-
Step 4
4. Fasten to toggle to ensure elements stay secure.
-
Step 5
5. Elements secured and ready to attach wash bag loop to harness trouser belt.
-
Step 6
6. Wash bag loop is attached to trouser belt, and placed inside trousers ready for washing