ZT Coverall Fit Harness
The ZT Overall Fit Harness provides the superior safety of a ZT harness with performance overalls supplied by Dickies Workwear. Ideal for work at height situations in physically demanding and messy environments.
Worn in the same way as a traditional overall, the ZT Overall Fit harness allows its wearer the comfort and functionality to get the job done as well as providing the very best in fall arrest technology.
Features include:
Pen pocket on sleeve.
Side elastication for a comfortable fit.
Tunnel waistband.
Two large pockets with side access.
One back pocket.
Rule pocket on right leg.
Knee pad pouches.
Two chest pockets with concealed stud fastening.
Fabric 65% polyester, 35% cotton, 260gsm
SMALL to fit chest 36-38"
MEDIUM to fit chest 40-42"
LARGE to fit chest 44 - 46"
XLARGE to fit chest 48 -50"
LEG LENGTH 30" REG or 32" LONG
(Other szes available on request & can be fitted to bespoke garments on request)
Certified to EN361:2002
Want to speak to somebody about how the ZT Coverall Fit Harness could work for you?
From £245.00
Order Now
Please select the quantities that you'd like by waist size and leg length.
Need another size?Order by phone 0844 573 4899
-
ZT Calf Gaiter
In the event of a fall, the ZT Calf Gaiter clenches the lower leg, distributing arrest fall forces and supporting body in seated position. The system works to reduce to forces normally experienced in a fall by up to 40%.
-
ZT Wash Bag
To wash the ZT Coverall Harness place the metal buckles in the washbag and wash in line with the washing instructions found
-
Dickies Workwear
Supplied by Dickies, the Coveralls are of the best quality. We can supply the harness into almost their full range of coveralls from Hi-Vis GO/RT to super lightweight coverall for warmer climates. Even better than that, if you decide you want your own corporate coverall we can probably do that too!
-
ZT Lanyard Webbing
The distinct orange webbing is the connection point for any lanyard or arrest block. It is hard wearing and highly engineered enabling the ZT Harness to be rated to individuals of weight up to 150kg, a standard harness is rated to only 100kg.
-
Gaiter Systems
The revolutionary gaiter removes the potentially harmfull and restrictive groin straps. We believe this makes our harnesses not only the safest available but also the most functional as they do not restrict people from getting on and doing their work.
-
ZT Safety Clip
This simple but effective buckle clips together from left to right holding you comfortably and firmly within the harness. It makes for a comfortable harness that you won't need to take off when not in constant use.
-
Step 1
Step into trouser section of the coverall
-
Step 2
Pull arms into coverall ensuring the harness webbing is correctly in place over the shoulder
-
Step 3
Connect Belt strap or buckle
-
Step 4
Depress ZT Clip Buckle on the left and clip into ZT Hook
-
Step 5
Adjust shoulder buckles to the correct fit; when correctly fitted, the ZT Clip Buckle should rest on the sternum
-
Step 6
Close Coverall Zip ensuring both of the lanyard connection points exit the coverall in the slots provided. ZT Standard fit harness (2) is supplied in trousers, place shoulder through webbing section and close ZT Clip buckle
-
Step 7
Attach Karabiner to each of the connection points and use the correct lanyard or arrest block for application following an appropriate risk assessment